Qondio
Front
Intel
IntelMart
Shares
My Qondio
Account
prasanna > Intel > How Oil Flows In Electric Screw Air Compressor?

qondio.com/8RPf PRINT EMAIL

How Oil Flows In Electric Screw Air Compressor?

By Prasanna Sutrave

In my previous post,you come to know about Air Flow of Screw Air Compressor.The flow of Oil is much more important in any Screw Air Compressor.

The Oil in Screw Air Compressor works as Coolant,Sealant and Lubricant.Therefore it is very important to take due care about Oil.

In Screw Air Compressor the Flow of Air and Oil has made combined effect on performance of the Compressor.It will be better to know the circulation of Oil for clear knowledge of Screw Air compressor.

From below description,you will come to know,How Oil flows and what is the importance of Oil in Screw Air Compressor.

Oil is circulated by the Receiver Air Pressure to various parts of the Compressor where it serves as lubricant,Coolant and Sealant.Cool Oil is injected directly
on to the Rotors limiting the Temperature rise of the Air during Compression and Sealing the Clearance between the Rotor Lobes,Casing and End plates.

In addition Oil is directed to the Bearings and Gears.The Air which is being Compressed mixes with the Oil which is introduced into the Compression Chambers and forms Mist.This Air-Oil mixture then enters the Receiver.

The Oil flows from the Air-Oil Receiver to Oil Cooler through a By-Pass Thermostat which By-Passes Oil Cooler upto 80 Degree Centigrate.The Oil flows
through Strainer,Oil Check Valve, and then to Oil Filter.

Should the Filter become so Clogged with Dirt so as to seriously restrict the flow of Oil,a Relief Valve inside the Filter opens to allow the Oil to By-Pass the Filter Element.The Cooled Oil from the Filter is then piped to Oil Inlet Manifold.

At the Manifold three outlet connections are taken to

A)"Y" type Strainer and Choke to Step-Up Gears.
B)Male and Female Rotors.
C)Bearings.

The Air and Oil Mist passes through Air Discharge Valve to Air-Oil Receiver.The Cycle is thus repeated.

For Detail Working of Electric Screw Air Compressor,you have to read my privious posts.

For more,please visit
http://www.pnengineering.blogspot.com/

This intel first appeared on: http://pnengineering.blogspot.com

Contributed by prasanna on January 13, 2009, at 11:49 PM UTC.

Reactions

No reactions yet.

Rate This Intel

Please login or sign up to rate this intel.

Comments

Please login or sign up to add a comment.

Share

Copyright Notice

The copyright for this content entitled "How Oil Flows In Electric Screw Air Compressor?" has been specified by the contributor as:

All Rights Reserved

This content may not be copied, distributed or adapted by anyone under any circumstances.

Login Here with
Any Email Address
Any Password
No account? Sign up.

Intel Contributor
This intel was contributed by prasanna


prasanna

Qondio Archive
May, 2012
123456
78910111213
14151617181920
21222324252627
28293031


2008
January, February, March, April, May, June, July, August, September, October, November, December
2009
January, February, March, April, May, June, July, August, September, October, November, December
2010
January, February, March, April, May, June, July, August, September, October, November, December
2011
January, February, March, April, May, June, July, August, September, October, November, December
2012
January, February, March, April, May

Sign Up
Not a member yet? Qondio is a powerful network for making it online. If you have a website to promote, we can help. Sign up and get in on the action.

About Qondio
Welcome to Qondio! Discover the awesome power this network can deliver by going to our About page. Or you could skip straight to the Sign Up form.

ABOUT
SUCCESS GUIDE
FEATURES
FAQ
ADVERTISE
CONTACT
USAGE POLICY
PRIVACY POLICY


TWITTER
FACEBOOK